18 deg Cone for Stability Check
18 deg Cone for Stability Check
By:
$0.00 USD
Instructions: Align the tip of the cone with center of mass of your assembly.
The feet or wheels or your assembly must be outside the volume of the cone.
If it is not, the equipment will be more likely to tip over.
Refer to this blog post for details: https://vention.io/blogs/calculating-the-stability-of-your-equipment-89
0 comments
All parts available
Not sure where to start?
Get help from an expertTechnical Specifications
| Spec Attribute | Spec Value |
|---|---|
| Design number | ME-OT-347590 v1 |
| Weight | 0.0 kg |
| Dimensions (L x W x H) | 0 x 0 x 0 mm |
| Unit price | $0.00 USD |
| Use case | Other Equipment |
| Application | Other |
| Assembly time | 0:00 |
Supporting Documents
Technical Drawings
Technical Documents
Calculators
Technical Specifications
| Spec Attribute | Spec Value |
|---|---|
| Design number | ME-OT-347590 v1 |
| Weight | 0.0 kg |
| Dimensions (L x W x H) | 0 x 0 x 0 mm |
| Unit price | $0.00 USD |
| Use case | Other Equipment |
| Application | Other |
| Assembly time | 0:00 |
Supporting Documents
Technical Drawings
Technical Documents
Calculators
Design Feedback